Pilot Scale Roller Milling of Chickpeas into a De-Hulled Coarse Meal and Fine Flour

Abstract

Chickpeas and other high protein plants are becoming increasingly popular. Traditionally, attrition or hammer mills are used for milling chickpeas. However, the use of roller mills on chickpeas has not been extensively researched. This study compared pilot-scale milling trials involving whole Kabuli compared to split and de-hulled Desi chickpeas. A flow sheet was designed and optimized for meal production with minimal co-product flour produced. Milling yields, particle size, and proximate analysis data were recorded. The optimum flow sheet consisted of 4 break passages, 2 smooth roll passages, and 4 purifiers. Results showed whole Kabuli chickpeas had a higher meal yield, at 63.8%, than split Desi seeds, at 54.1%; with both percentages proportional to the weight of milled seed. The remaining 36.2% or 45.9% consisted of co-product flour, feed streams and process losses. Both meals had an average particle size between 600 and 850 microns and both flours had a bimodal particle size distribution with peaks at 53 and 90–150 microns. The use of purifiers facilitated better separation of hull and resulted in lower crude fiber levels in the Kabuli meal. Proximate analysis trends were similar for both chickpea meals with higher protein (~2% more), crude fiber (~1% more) and ash (0.1–0.3% more) in the meal compared to the co-product flour. The co-product flour had substantially higher total starch (~15% more) than the meal. The results of this research can be used to modify wheat mills to process chickpeas.