Physical and Mechanical Properties of Juvenile Wood of Anadenanthera peregrina (L.) Speg. from Thinning

Abstract

Reducing the rotation period through thinning and changing planting spacing can influence the technological properties of wood, with little attention paid to the effects of these variables on the raw material, which limits its processing in the wood sector. This work aimed to evaluate the physical and mechanical properties of wood from Anadenanthera peregrina juveniles thinned in three planting spacings (3 m × 3 m, 4 m × 4 m, and 5 m × 5 m). The physical properties in the base––top and pith––shell directions and the mechanical properties of the samples were evaluated. The results indicate better technological properties for wood withwith larger spacings. The physical properties showed decreasing trends in the base––top direction and increasing trends in the pith––bark direction, with a distinct trend in the degree of collapse. The average basic density of the different planting spacings varied between 0.47 g cm−3 and 0.63 g cm−3. The mechanical properties obtained for the 4 m × 4 m spacing were superior to those of the other spacings. Wood from young A. peregrina is an alternative for industrial processing, as wood from higher planting densities is more suitable for purposes that require resistance and rigidity.