Abstract
Physical and chemical characteristics of activated sludge such as floc size, density, specific surface, carbohydrate content, dehydrogenase activity and settleability were investigated by seven parallel bench scale activated sludge units operated under different sludge ages (1.1–17.4 days). The analytical methods used included a dye adsorption technique for specific surface area determinations, the Coulter Counter method for floc size measurements and interference microscopy for floc density determinations. The typical floc sizes were found to be in the range 10–70 μm with floc densities in the range 1.015–1.034 g cm −3. A strong correlation between floc density and size was obtained. The specific surface areas measured (typically 100–200 m 2 g −1 dry sludge) were found to be one to two orders of magnitude higher than the corresponding geometric floc surface areas, indicating a porous floc structure. Sludge settleability, for non-filamentous sludges, was well correlated to both floc size, density and specific surface area, but not to the sludge carbohydrate content, which was found to vary between 6 and 18%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
