Abstract

ABSTRACT The photovoltaic thermal (PV/T) systems are promising techniques for cooling photovoltaic modules and performance improvement. The heat-exchanging fluid removes the heat from the PV module, which can be utilized in the low-temperature application, including space heating. In the present study, a photovoltaic thermal system based on a double pass air collector under recycling is theoretically investigated for its overall performance and analysis. An analytical model explaining the different temperatures and heat transfer characteristics of the proposed PV/T system is developed and employed to study the effects of different recycling ratios at varying mass flow rates, the area covered by the PV module (packing factor), solar irradiation, and varying duct depth on thermal, electrical, and combined efficiency. The analytical model utilizes an iterative solution to work out the governing energy balance equations describing the complex heat and mass exchanges. The results show that the new design collector encloses photovoltaic cells under recycling, reduces the PV surface temperature from 97°C (without cooling) to 45°C (with cooling) at 0.15 kg/sec mass flow rate of air and recycle ratio of 1.8 and, thereby improves the electrical efficiency from 12% to 16%, which is 13% more increment than a non-recycling case. The influences of the identified parameters, which may vary with the proposed design performance, are presented in detail.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.