Abstract
Surface mount unit cells for phase leading bandpass networks are developed for easy integration with microstrip lines on PCB for the phase shifter implementation. With the suitable design of layout and fabricated in low temperature cofired ceramic (LTCC), the bandpass network and its parasitic components are controlled to ensure the broadband operation. These unit cells of phase leading bandpass networks are mounted with phase lag microstrip lines on PCB for the design of broadband phase shifters. Unit cells can be cascaded in a single branch of power divider to create large phase shift or placed at different branch to give small phase shift while keeping sufficient return loss bandwidth. Four phase shfiters with phase shift of 22.5°, 45°, 90° and 135° are fabricated and measured using three different unit cells. Measured results of all four phase shifters show about 100% phase shift bandwidth, better than 10 dB return loss and less than 1.4 dB imbalance from 2.6 to 7.7 GHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.