Abstract
Hydrophilic polyvinyl alcohol membranes, modified by lithium bromide, were prepared with glutaraldehyde as a crosslinking reagent. The membranes were investigated for the pervaporation dehydration of a water–isopropyl systems. The effect of the feed temperature on permeation flux and membrane selectivity was studied. The characterization of modified membranes was performed using Fourier transform infrared spectroscopy (FT‐IR), differential scanning calorimeter (DSC) and X‐ray diffraction. It was observed that the crystallinity of membranes increased as lithium bromide was added to the polymer. High performance liquid chromatography (HPLC) was used to analyze water content and isopropyl alcohol in the feed and permeate samples The pervaporation tests also confirmed an enhancement in water permeability through adding LiBr to the polymer, because of the high hydrophilic properties of this salt. According to pervaporation experiments conducted at 50°C, the water flux increased from 0.1049 kg/ m2 hr to 0.1114 kg/ m2 hr as 0.5 wt% of LiBr was added to the polymer matrix. Furthermore, an addition of 1 wt% of LiBr compared to homogeneous PVA membrane increased selectivity from 76 to 779. POLYM. ENG. SCI., 59:E101–E111, 2019. © 2018 Society of Plastics Engineers
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
