Abstract
Nickel-based iron-chromium alloys are used as steam generator (SG) tubing materials in nuclear power plants (NPPs) but experience intergranular stress corrosion cracking (IGSCC) and lead stress corrosion cracking (PbSCC) due to the harsh operating conditions of NPPs. In order to improve the integrity of SGs, many studies have sought suitable inhibitors for IGSCC, while those for PbSCC have been sought to a limited extent. In this study, the performance of nickel boride (NiB) as an inhibitor for PbSCC was evaluated. Nickel boride has been shown to be a good inhibitor for IGSCC of Alloy (or Inconel) 600 in a caustic aqueous solution containing no lead (Pb). No significant SCC was observed to occur in Alloy 600 tested in pure water under the slow strain rate test (SSRT) condition in this study. A mixed mode of IGSCC and TGSCC, however, occurred relatively easily in Alloy 600 tested in pure water containing lead oxide (PbO) at 315 °C. The susceptibility of Alloy 600 to SCC decreased with the addition of NiB, implying that NiB can be used as an inhibitor for PbSCC in Pb-contaminated water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
