Performance indices of a common rail-system CI engine powered by diesel oil and biofuel blends

Abstract

Conventional fuels used for supplying internal combustion piston engines include petrols and diesel oils produced from petroleum. These are a non-renewable energy source. The environmental policy of the European Union is geared towards increasing the share of renewable fuels in the overall energy consumption. An alternative fuel originating from a renewable source, which could be used for feeding self-ignition internal combustion engines are the fatty acid methyl esters (FAME) of plant oils. The paper reports selected results of testing a 1.3 MULTIJET SDE 90 PS self-ignition engine with the Common Rail reservoir feed system supplied with mixtures of diesel oil and rape oil fatty acid methyl esters (FAME). Tests were carried out on an engine test bed equipped with an eddy-current brake. The purpose of the tests was to determine the economic–energy and ecological indices of engine operation. The concentrations of exhaust gas gaseous components were measured using a MEXA-1600DEGR analyzer, while the particulate concentrations, with a MEXA-1230PM analyzer. In addition, the variations of working medium pressures in the engine chamber and of fuel pressure upstream the injector were recorded as a function of crankshaft rotation angle using the AVL IndiSmart 612 indication system for this purpose. The physicochemical properties of fuels used in the tests were determined using a fuel analyzer. The obtained testing results made it possible to determine and assess the operation indices of the engine fed with mixtures of diesel oil and rape oil fatty acid methyl esters (FAME) with slightly higher ester contents than the requirements of the currently applicable diesel oil standard.