Peptides Derived From Reactive Center Loops Inhibit Digestive Trypsin‐Like Enzymes in Lepidopteran Pests

The chemoattractant receptor-homologous molecule expressed on Th2 cells (CRTH2) is a G protein-coupled receptor that mediates the pro-inflammatory effects of prostaglandin D(2) (PGD(2)) generated in allergic inflammation. The CRTH2 receptor shares greatest sequence similarity with chemoattractant receptors compared with prostanoid receptors. To investigate the structural determinants of CRTH2 ligand binding, we performed site-directed mutagenesis of putative mCRTH2 ligand-binding residues, and we evaluated mutant receptor ligand binding and functional properties. Substitution of alanine at each of three residues in the transmembrane (TM) helical domains (His-106, TM III; Lys-209, TM V; and Glu-268, TM VI) and one in extracellular loop II (Arg-178) decreased PGD(2) binding affinity, suggesting that these residues play a role in binding PGD(2). In contrast, the H106A and E268A mutants bound indomethacin, a nonsteroidal anti-inflammatory drug, with an affinity similar to the wild-type receptor. HEK293 cells expressing the H106A, K209A, and E268A mutants displayed reduced inhibition of intracellular cAMP and chemotaxis in response to PGD(2), whereas the H106A and E268A mutants had functional responses to indomethacin similar to the wild-type receptor. Binding of PGE(2) by the E268A mutant was enhanced compared with the wild-type receptor, suggesting that Glu-268 plays a role in determining prostanoid ligand selectivity. Replacement of Tyr-261 with phenylalanine did not affect PGD(2) binding but decreased the binding affinity for indomethacin. These results provided the first details of the ligand binding pocket of an eicosanoid-binding chemoattractant receptor.

We have used a homology model of the extracellular domain of the 5-HT(3) receptor to dock granisetron, a 5-HT(3) receptor antagonist, into the binding site using AUTODOCK. This yielded 13 alternative energetically favorable models. The models fell into 3 groups. In model type A the aromatic rings of granisetron were between Trp-90 and Phe-226 and its azabicyclic ring was between Trp-183 and Tyr-234, in model type B this orientation was reversed, and in model type C the aromatic rings were between Asp-229 and Ser-200 and the azabicyclic ring was between Phe-226 and Asn-128. Residues located no more than 5 A from the docked granisetron were identified for each model; of 26 residues identified, 8 were found to be common to all models, with 18 others being represented in only a subset of the models. To identify which of the docking models best represents the ligand-receptor complex, we substituted each of these 26 residues with alanine and a residue with similar chemical properties. The mutant receptors were expressed in human embryonic kidney (HEK)293 cells and the affinity of granisetron determined using radioligand binding. Mutation of 2 residues (Trp-183 and Glu-129) ablated binding, whereas mutation of 14 other residues caused changes in the [(3)H]granisetron binding affinity in one or both mutant receptors. The data showed that residues both in and close to the binding pocket can affect antagonist binding and overall were found to best support model B.

Serpins function as a trap for serine proteases, presenting the reactive center loop (RCL) as a target for individual proteases. When the protease cleaves the RCL, the serpin and protease become covalently linked leading to a loss of function of both the protease and the serpin; this suicide inhibition is often referred to as a "mouse trap." When the RCL P1-P1' scissile bond is cut by the protease, the resulting bond between the protease and the RCL leads to insertion of the cleaved RCL into the β-sheet A and relocation of the protease to the opposite pole of the serpin, forming a suicide complex. Only a relatively small part of the serpin molecule can be removed in deletion mutations before the serpin RCL inhibitory function is lost. Serpin RCL peptides have been developed to block formation of serpin aggregates in serpinopathies, genetic serpin mutations wherein the abnormal serpins insert their RCL into adjacent serpins forming aggregates of inactive serpins.We have further posited that this natural cleavage site in the serpin RCL may form active serpin metabolites with potential to add to the serpin's inhibitory functions. We have developed RCL peptides based upon predicted serpin RCL cleavage (or metabolism) sites and tested these serpins for inhibitory function. In this chapter we describe the development of RCL-derived peptides, peptides derived based upon the RCL sequences of two myxomaviral serpins. Methods used to develop peptides are described for RCL-derived peptides from Serp-1, a thrombotic and thrombolytic serine protease inhibitor, and Serp-2, a cross class serine and cysteine protease inhibitor (Subheadings 2.1 and 3.1). Approaches to testing RCL peptide functions, in vitro by molecular assays and in vivo in models of cell migration, MHV-68 infection, and aortic allograft transplant are described (Subheadings 2.2 and 3.2).

Most G protein-coupled receptors contain a series of highly conserved proline and tryptophan residues within their hydrophobic transmembrane domains (TMD I-VII). To study their potential role in ligand binding and receptor function, the rat m3 muscarinic acetylcholine receptor was used as a model system. A series of mutant receptors in which the conserved proline and tryptophan residues were individually replaced with alanine and phenylalanine, respectively, was created and transiently expressed in COS-7 cells. [3H]N-methylscopolamine ([3H]NMS) saturation binding studies showed that three of the seven mutant receptors studied (Pro242-->Ala, TMD V; Pro505-->Ala, TMD VI; Pro540-->Ala, TMD VII) were expressed at 35-100 times lower levels than the wild-type receptor while displaying 'm3-like' antagonist binding affinities. Pro201-->Ala (TMD IV) showed drastically reduced binding affinities (up to 450-fold) for both muscarinic agonists and antagonists. Whereas most mutant receptors retained strong functional activity, Pro540-->Ala (TMD VII) was found to be severely impaired in its ability to stimulate carbachol-induced phosphatidyl inositol hydrolysis (Emax approximately 25% of wild type m3). Interestingly, this mutant receptor bound muscarinic agonists with 7- to 19-fold higher affinities than the wild type receptor. The Trp-->Phe substitutions (Trp192-->Phe, TMD IV; Trp503-->Phe, TMD VI; Trp530-->Phe, TMD VII) resulted in less pronounced changes (compared with the Pro-->Ala mutant receptors) in both ligand binding and receptor function. Our data indicate that the proline residues that are highly conserved across the entire superfamily of G protein-coupled receptors play key roles in receptor expression, ligand binding and receptor activation.

Serpins form a large class of protease inhibitors involved in regulation of a wide spectrum of physiological processes. Recently identified prokaryotic members of this protein family may provide a key to the evolutionary origins of the unique serpin fold and the associated inhibitory mechanism. We performed a biochemical characterization of a serpin from Bifidobacterium longum, an anaerobic Gram-positive bacterium that naturally colonizes human gastrointestinal tract. The B. longum serpin was shown to efficiently inhibit eukaryotic elastase-like proteases with a stoichiometry of inhibition close to 1. Porcine pancreatic elastase and human neutrophil elastase were inhibited with the second order association constants of 4.7 x 10(4) m(-1) s(-1) and 2.1 x 10(4) m(-1) s(-1), respectively. The B. longum serpin is expected to be active in the gastrointestinal tract, because incubation of the purified recombinant serpin with mouse feces produces a stable covalent serpin-protease adduct readily detectable by SDS-PAGE. Bifidobacteria may encounter both pancreatic elastase and neutrophil elastase in their natural habitat and protection against exogenous proteolysis may play an important role in the interaction between these commensal bacteria and their host.

The serpin mechanism of protease inhibition involves the rapid and stable incorporation of the reactive center loop (RCL) into central β-sheet A. Serpins therefore require a folding mechanism that bypasses the most stable "loop-inserted" conformation to trap the RCL in an exposed and metastable state. This unusual feature of serpins renders them highly susceptible to point mutations that lead to the accumulation of hyperstable misfolded polymers in the endoplasmic reticulum of secretory cells. The ordered and stable protomer-protomer association in serpin polymers has led to the acceptance of the "loop-sheet" hypothesis of polymerization, where a portion of the RCL of one protomer incorporates in register into sheet A of another. Although this mechanism was proposed 20 years ago, no study has ever been conducted to test its validity. Here, we describe the properties of a variant of α(1)-antitrypsin with a critical hydrophobic section of the RCL substituted with aspartic acid (P8-P6). In contrast to the control, the variant was unable to polymerize when incubated with small peptides or when cleaved in the middle of the RCL (accepted models of loop-sheet polymerization). However, when induced by guanidine HCl or heat, the variant polymerized in a manner indistinguishable from the control. Importantly, the Asp mutations did not affect the ability of the Z or Siiyama α(1)-antitrypsin variants to polymerize in COS-7 cells. These results argue strongly against the loop-sheet hypothesis and suggest that, in serpin polymers, the P8-P6 region is only a small part of an extensive domain swap.

The starch-hydrolysing enzyme GA (glucoamylase) from Rhizopus oryzae is a commonly used glycoside hydrolase in industry. It consists of a C-terminal catalytic domain and an N-terminal starch-binding domain, which belong to the CBM21 (carbohydrate-binding module, family 21). In the present study, a molecular model of CBM21 from R. oryzae GA (RoGACBM21) was constructed according to PSSC (progressive secondary structure correlation), modified structure-based sequence alignment, and site-directed mutagenesis was used to identify and characterize potential ligand-binding sites. Our model suggests that RoGACBM21 contains two ligand-binding sites, with Tyr32 and Tyr67 grouped into site I, and Trp47, Tyr83 and Tyr93 grouped into site II. The involvement of these aromatic residues has been validated using chemical modification, UV difference spectroscopy studies, and both qualitative and quantitative binding assays on a series of RoGACBM21 mutants. Our results further reveal that binding sites I and II play distinct roles in ligand binding, the former not only is involved in binding insoluble starch, but also facilitates the binding of RoGACBM21 to long-chain soluble polysaccharides, whereas the latter serves as the major binding site mediating the binding of both soluble polysaccharide and insoluble ligands. In the present study we have for the first time demonstrated that the key ligand-binding residues of RoGACBM21 can be identified and characterized by a combination of novel bioinformatics methodologies in the absence of resolved three-dimensional structural information.

Serpins (serine protease inhibitors) are a large family of structurally related proteins found in a wide variety of organisms, including hematophagous arthropods. Protein analyses revealed that Iris, previously described as an immunomodulator secreted in the tick saliva, is related to the leukocyte elastase inhibitor and possesses serpin motifs, including the reactive center loop (RCL), which is involved in the interaction between serpins and serine proteases. Only serine proteases were inhibited by purified recombinant Iris (rIris), whereas mutants L339A and A332P were found devoid of any protease inhibitory activity. The highest Ka was observed with human leukocyte-elastase, suggesting that elastase-like proteases are the natural targets of Iris. In addition, mutation M340R completely changed both Iris substrate specificity and affinity. This likely identified Met-340 as amino acid P1 in the RCL. The effects of rIris and its mutants were also tested on primary hemostasis, blood clotting, and fibrinolysis. rIris increased platelet adhesion, the contact phase-activated pathway of coagulation, and fibrinolysis times in a dose-dependent manner, whereas rIris mutant L339A affected only platelet adhesion. Taken together, these results indicate that Iris disrupts coagulation and fibrinolysis via the anti-proteolytic RCL domain. One or more other domains could be responsible for primary hemostasis inhibition. To our knowledge, this is the first ectoparasite serpin that interferes with both hemostasis and the immune response.

Complementary Structural Mass Spectrometry Techniques Reveal Local Dynamics in Functionally Important Regions of a Metastable Serpin

C1 inhibitor, a member of the serpin family, is a major down-regulator of inflammatory processes in blood. Genetic deficiency of C1 inhibitor results in hereditary angioedema, a dominantly inheritable, potentially lethal disease. Here we report the first crystal structure of the serpin domain of human C1 inhibitor, representing a previously unreported latent form, which explains functional consequences of several naturally occurring mutations, two of which are discussed in detail. The presented structure displays a novel conformation with a seven-stranded beta-sheet A. The unique conformation of the C-terminal six residues suggests its potential role as a barrier in the active-latent transition. On the basis of surface charge pattern, heparin affinity measurements, and docking of a heparin disaccharide, a heparin binding site is proposed in the contact area of the serpin-proteinase encounter complex. We show how polyanions change the activity of the C1 inhibitor by a novel "sandwich" mechanism, explaining earlier reaction kinetic and mutagenesis studies. These results may help to improve therapeutic C1 inhibitor preparations used in the treatment of hereditary angioedema, organ transplant rejection, and heart attack.

Ligand binding thermodynamics and kinetics are critical parameters for drug design. However, it has proven challenging to efficiently predict ligand binding thermodynamics and kinetics from molecular simulations due to limited simulation timescales. Protein dynamics, especially in the ligand binding pocket, often plays an important role in ligand binding. Based on our previously developed Ligand Gaussian accelerated molecular dynamics (LiGaMD), here we present LiGaMD2 in which a selective boost potential was applied to both the ligand and protein residues in the binding pocket to improve sampling of ligand binding and dissociation. To validate the performance of LiGaMD2, the T4 lysozyme (T4L) mutants with open and closed pockets bound by different ligands were chosen as model systems. LiGaMD2 could efficiently capture repetitive ligand dissociation and binding within microsecond simulations of all T4L systems. The obtained ligand binding kinetic rates and free energies agreed well with available experimental values and previous modeling results. Therefore, LiGaMD2 provides an improved approach to sample opening of closed protein pockets for ligand dissociation and binding, thereby allowing for efficient calculations of ligand binding thermodynamics and kinetics.

Monoclonal antibodies to the reactive centre loop (RCL) of human corticosteroid-binding globulin (CBG) can protect against proteolytic cleavage

Site-Directed Mutagenesis of Cysteinyl and Serine Residues of Human Thromboxane A2Receptor in Insect Cells

Toll-like receptors (TLRs) play key roles during pathogen invasion to initiate innate immune responses. Toll-like receptor 3 (TLR3) recognizes double-stranded RNA (microbial and endogenous) and transmits signals to activate NF-kappa B. TLR3 is restricted to acidic pH+ intracellular compartments of innate immune cells (viz immature DC). Ligand binding and formation of multimeric signal complexes, to activate down-stream signaling, are facilitated by acidic pH in these compartments. Mutational and co-crystallization studies determined the interaction of TLR3 & ligand binding at the molecular level and also individual residues important in ligand recognition and signal transduction. Besides, neutralizing antibodies were utilized as tools for better understanding of ligand binding and TLR3 signaling. In the present study, we report results of a TLR3 antibody which blocks ligand (poly IC) binding and its' effect on functional activity. We tested multiple TLR3 antibodies, generated through use of synthetic peptides designed to include various regions of protein and also the residues playing important role in ligand binding. The binding and blocking (ligand) activities were analyzed by flow cytometry using TLR3 transfectant cells in presence/absence of poly IC. We also tested blocking activity in a functional assay by measuring secreted alkaline phosphatase (SEAP) in cultures of TLR3-NF-kB-SEAP co-transfectants stimulated wih poly IC in the presence of antibody.

Serpins fold into a native metastable state and utilize a complex conformational change to inhibit target proteases. An undesirable result of this conformational flexibility is that most inhibitory serpins are heat sensitive, forming inactive polymers at elevated temperatures. However, the prokaryote serpin, thermopin, from Thermobifida fusca is able to function in a heated environment. We have determined the 1.8 A x-ray crystal structure of thermopin in the native, inhibitory conformation. A structural comparison with the previously determined 1.5 A structure of cleaved thermopin provides detailed insight into the complex mechanism of conformational change in serpins. Flexibility in the shutter region and electrostatic interactions at the top of the A beta-sheet (the breach) involving the C-terminal tail, a unique structural feature of thermopin, are postulated to be important for controlling inhibitory activity and triggering conformational change, respectively, in the native state. Here we have discussed the structural basis of how this serpin reconciles the thermodynamic instability necessary for function with the stability required to withstand elevated temperatures.