Abstract

AbstractThermoelectric (TE) materials have attracted significant attention because they can be used to directly harvest waste heat into electricity. Organic TE materials like poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) have advantages including high mechanical flexibility, low cost, and low intrinsic thermal conductivity. However, their TE properties are notably inferior to their inorganic counterparts. Here, PEDOT:PSS films with very high thermoelectric properties through the sequential treatments with H2SO4, water, and ethanol solution of tetrakis(dimethylamino)ethylene (TDAE) are reported for the first time. The PEDOT:PSS films can exhibit a Seebeck coefficient of 58.2 µV K−1 and electrical conductivity of 1552 S cm−1, and the corresponding power factor is 526 µW m−1 K−2. The water treatment prior to the TDAE solution treatment is crucial for the high TE properties of PEDOT:PSS films. Without the water treatment, the control PEDOT:PSS films exhibit a Seebeck coefficient of only 32.4 µV K−1 and electrical conductivity of 1124 S cm−1, and the corresponding power factor is only 118 µW m−1 K−2. The effect of the water treatment on the Seebeck coefficient is attributed to the swelling of PEDOT:PSS films, which facilitates the penetration of TDAE from solution into the polymer films and thus the reduction of PEDOT:PSS.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.