Pedikelschraubenaugmentation aus biomechanischer Sicht

Abstract

Severe osteoporosis is a serious problem in the instrumentation during spine surgery. Besides kyphosis, adjacent vertebral fractures and of course pedicle screw loosening and implant pullout are frequent challenges in instrumentation of the osteoporotic spine. In addition to screw diameter and length, bone mineral density has the most important impact on the stability of a pedicle screw. In cases of severe osteoporosis cement augmentation increases the stability of a pedicle screw. Pullout force can be increased with augmentation by 96-278%. Nowadays, there are two different procedures for augmentation: cement augmentation of the vertebra before inserting the screw into the soft, fresh cement or augmentation via a perforated screw that has already been inserted.The main problem in augmentation techniques are cement leakages. In both techniques leakages may occur. The problem of leakages seems to be less severe in the augmentation technique via the perforated screw, because cement application can be stopped immediately if the onset of leakage is noticed. Even surgical revision of cement augmented screws is not a major clinical problem based on recent biomechanical studies. The revision screw can be chosen 1 mm thicker and can be cement augmented again without technical problems.