Abstract

AbstractNumerous studies have reported the potential of silica as a biochar (BC) modifier. However, despite its high silica content, fly ash is rarely used for BC modification. Herein, modified BCs were produced by co-pyrolysis of corn stalks with alkali-fused fly ash (AFFA) at 200 and 600 °C (denoted as AFFA/BC). The Pb(II) adsorption mechanism and adsorption performance were investigated. The AFFA/BC had larger specific surface areas than the pure BC samples (2.54–137 vs. 0.50 m2 g−1) owing to their stable carbon structure. The Pb(II) adsorption capacity of AFFA/BC in water was approximately 6% higher than that of BC owing to the increased cation (Na+) exchange and new bonding sites, such as C–O and Si–O. AFFA/BC exhibited good Pb(II) adsorption performance in high-concentration simulated wastewater (pH 4–6), with a maximum adsorption capacity of 110.29 mg g−1. The Pb(II) adsorption mechanism was in accordance with the pseudo-second-order kinetic and Langmuir isotherm models. At 25 °C and pH 5, the theoretical Pb(II) adsorption capacities of AFFA200/BC and AFFA600/BC were 201.66 and 186.81 mg g−1, respectively, compared to 145.98 mg g−1 of BC. Physical adsorption, precipitation, cation exchange, and complexation were identified as the main Pb(II) adsorption mechanisms through X-ray photoelectron spectrometry. Graphical Abstract

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.