Part-per-Billion (Ppb)-Level Acetylene Sensor Employing Optical Quartz Enhanced Photoacoustic Spectroscopy (QEPAS) with an Erbium-Doped Fiber Amplifier (EDFA) and a Fiber-Optic Fabry–Perot Interferometer

Abstract

An all-optical double-pass quartz enhanced photoacoustic spectroscopy (QEPAS) sensor for the detection of acetylene (C2H2) at part-per-billion (ppb) levels was developed and experimentally validated. By employing an erbium-doped fiber amplifier (EDFA) capable of emitting up to 1 W of optical power, a commercial quartz tuning fork (QTF) resonating at 30.7 kHz, and double-pass acoustic microresonators, the amplitude of the QEPAS signal was significantly enhanced, thereby improving the sensitivity of the C2H2-QEPAS sensor. Instead of using piezoelectric detection in conventional QEPAS, a highly sensitive fiber-optic Fabry–Perot interferometer (FPI) was employed to measure the vibration of the QTF prong. A working point self-stabilizing technique was exploited to improve the demodulation sensitivity and stability. The linear response of the sensor to laser power and C2H2 concentration confirmed that no saturation occurred. With an excitation laser power of 1 W and a C2H2 absorption line of 1532.83 nm, a C2H2 minimum detection limit (MDL) of 19.1 ppb was achieved, corresponding to a normalized noise equivalent absorption coefficient (NNEA) of 1.58 × 10−8 cm−1∙W∙Hz−1/2. Owing to its high sensitivity, long-term stability, and immunity to electromagnetic interferences, the QEPAS sensor provides considerable potential for remote gas sensing in environmental monitoring and other applications.