Abstract
The mechanical properties of Aluminum metal matrix composites (AMMCs) have made them a popular choice in various industries such as automotive, aerospace, and marine. However, their composition, which includes abrasive reinforcements, makes them difficult to machine using conventional techniques. So, unconventional machining processes play a vital role in the machining of these materials. Electrical discharge turning (EDT) is one of the configurations of electrical discharge machining (EDM) that is utilized to machine cylindrical-shaped workpieces. In this study, AMMC Al 7075/ZrO2 was fabricated using the stir casting method. Further, investigated the effect of machining parameters of EDT, namely pulse Current (I), pulse on time (T-ON), and rotating speed (RPM), on Al 7075/ZrO2 in terms of material removal rate (MRR), tool wear rate (TWR), and overcut (OC) using one parameter at a time (OPAT) method. The outcome of the experiment reveals that MRR, TWR, and OC are more impacted by pulse current than by rotational speed. A decrease in TWR was also found with an increase in pulse on time for all rotational speeds. The size of the craters and globules observed lower with 1400 RPM in the micrograph image.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.