Abstract
In this study, palm shell activated carbon modified with task-specific ionic liquids was used as a novel composition for the removal of mercury from aqueous solutions in water samples through a batch-adsorption technique. The effect of pH, adsorbent dosage, equilibrium time, temperature and initial concentration of mercury ions on the removal efficiency were examined. The maximum adsorption of mercury at room temperature was 83.33mg/g at pH 8 with a contact time of 3h and an initial concentration of 10–200mg/L. The experimental data were fitted well with the linear form of Langmuir model. Adsorption kinetics followed a pseudo-second-order model. The calculated activation energy for adsorption was 68.21kJ/mol, indicates that the adsorption process involves some chemical forces and occurs by a chemisorption process. Thermodynamic parameters, including ΔH°, ΔS° and ΔG° for the adsorption process of mercury from aqueous solutions onto palm-shell activated carbon impregnated with trioctylmethylammonium thiosalicylate (TOMATS) indicated that adsorption was endothermic and spontaneous process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.