Abstract
Oxidation behavior of TiAl3 and L12 coated Ti-45at%Al-5at%Nb alloys at 1173K in air was investigated using mass gain measurement, field emission scanning electron microscopy, transmission electron microscopy, electron-probe microanalysis, glow discharge optical electron spectroscopy, and glancing angle X-ray diffraction analysis. The TiAl3 formed meta-stable alumina θ-Al2O3, while the oxide scale on the L12 consisted of a duplex structure with an outer rutile TiO2 and an inner α-Al2O3. During the very initial stages of oxidation both Ti and Al in the L12 coating could be oxidized, and then the faster diffusing Ti goes out to form an outer, continuous Ti-rich oxide which covers the slow growing Al2O3. In case of the TiAl3 an outer, continuous TiO2 layer was not observed because of the smaller amount of Ti in the TiAl3. It could be concluded that the outer, Ti-rich oxide enhanced a phase transformation of Al2O3 from θ to α. To elucidate the Ti effect, Ti-vapor treated TiAl3 and Ni-50at%Al were oxidized at 1173K in air, and showed formation of an α-Al2O3, in contrast to θ-Al2O3 on their bare alloys.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Solid Mechanics and Materials Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
