Abstract
The static fatigue of SiC‐based fiber bundles and single fibers has been examined in previous papers, with emphasis placed on the analysis of the stress–rupture time data, and on the modelling of delayed failure from slow crack growth. The present paper investigates the oxidation of the fibers during static fatigue, at temperatures in the intermediate temperature range (500°–800°C). Two oxidation‐induced phenomena have been evidenced: the formation of a thin silica film at the surface of fibers and the delayed failure of fiber bundles and single filaments. The stress–rupture time data are interpreted with respect to the chemical and structural characteristics of fibers, and to the oxide film growth rate. The structural analysis of the fibers was carried out using scanning electron microscopy and Auger electron spectroscopy. Delayed failure was found to result from slow crack propagation from surface defects, as a result of the consumption of the free carbon at grain boundaries and the local stresses induced by the SiC→SiO2 transformation at the crack tip. The respective contributions of these phenomena to static fatigue are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
