Abstract
<div class="section abstract"><div class="htmlview paragraph">Different weight percentages (0, 1 and 2 wt. %) of Calcium hexaboride (CaB<sub>6</sub>) is reinforced with pure magnesium and the composite is fabricated through powder metallurgy technique. The fabricated samples are used for the tribological evaluation. In this connection, the Taguchi optimization technique (L27 Orthogonal array) assisted Grey Relational analysis is used for predicting the significant factors to the tribological evaluation. The magnesium composite wear rate is evaluated by Archard’s mass loss method. Based on the obtained results, it is observed that the magnesium composite wear rate is increased by the effect of an increase in load. It was arising as a result of enhanced delamination wear mechanism which is confirmed by SEM observation on the worn-out pin surface.</div></div>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: SAE International Journal of Advances and Current Practices in Mobility
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.