Optimization Study of Parametric Thermal Bimetal Material Module for Green Building in Tropical Humid Climate

Abstract

The largest energy consumption that we use is the consumption of electrical energy in terms of meeting the lighting needs and building air conditioning requirements (World Energy Consumption, 2016). According to the Ministry of Energy and Mineral Resources (2017), Indonesia’s largest energy use in commercial buildings is for flight systems (63%), lighting systems (20%), vertical transportation (7%) electronic devices (10%). The use of energy in the fulfillment of excessive needs result in worsening conditions on earth. Data can be a reflection of how the condition of the earth that we live at this time. Energy savings should be made to reduce the damage already occurring on this earth such as electricity usage savings, optimization of use of materials, the use of motor vehicles that cause air pollution, and others. The way that can be used to reduce artificial energy use is to utilize the existing passive building design such as the use of solar energy that can be maximized during the day, so that the use of electrical energy for lamps and artificial air conditioning. reduced. In addition, it can also be considered the optimal use of wind direction and speed that can suppress the use of Air Conditioner (AC) in excess. Building envelope with bimetal thermal material module application is part of kinetic architecture via biomimicry approach. Kinetic architecture is a concept where buildings are designed to allow parts of buildings to move without compromising the unity of the structural system. Approaches that can be applied in green building design is by optimizing bimetal material module that utilizes the thermal coefficient of a material. With this approach, building envelopes are improvised so that they can adapt to the existing environment. This research take location of case study in Kampung Juminahan, Yogyakarta, Indonesia which has characters of comunal housing.