Abstract
The utilization of waste tyre in a green way would definitely mitigate the possible risks of the waste tyre accumulation. A green way to solution for the waste tyre problem is recycling. However, it is necessary to optimize the recycling process parameters to come up with the optimum conditions for the effective reuse of the waste tyre. In this study, response surface methodology (RSM) was used to model and optimize the parameters of curing of EPDM and waste tyre composite for the purpose of waste tyre recycling. EPDM with different loadings of ground waste tyre composites were prepared. Mechanical, thermal, and Soxhlet extraction tests were carried out for the samples. RSM was applied and process parameters were optimized. It was seen that the most effective parameter was the curing temperature. The optimal values of the parameters were determined as curing temperature of 172.1 °C, curing pressure of 15.0 MPa and ground waste tyre content of 14.8% by weight. To test the parameters determined from optimization study, the samples were prepared under optimum conditions, and it was shown that the samples prepared according to the optimum conditions have better thermal, mechanical, and curing properties. The results were heartening to pursue the waste tyre recycling option with a considerable amount of ground waste tyre content within the final composite material.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
