Optimization of sequential solvent extraction of collagen and ommochrome from Indian squid, Uroteuthis duvauceli

This research investigated and optimized the separation of carbon dioxide (CO2) from natural gas in an adsorption column filled with grafted-beam nanofiber adsorbent. The main purpose of using ANN and RSM models in this manuscript is to compare these two methods in predicting the CO2 adsorption capacity. In other words, it was made to find a suitable model that has the highest agreement with the experimental data. Also, the other purpose of using the RSM model is to detect the optimized empirical conditions. Moreover, two common ANN models are applied in this work, including a multilayer perceptron (MLP) and radial basis function (RBF). The novelties of this work are explained as follows: (1) detecting the optimized synthesis factors of NF-PAN/PUGMA sorbent which possess the highest CO2 adsorption capacity with the help of response surface methodology (RSM), (2) studying the simultaneous interaction of synthesis parameters on the CO2 adsorption capacity with the help of both RSM and artificial neural networks (ANNs), (3) testing two types of ANN models including multilayer perceptron (MLP) and radial basis function (RBF) to predict the effect of monomer volume percentage and irradiation dose on the CO2 adsorption capacity. Indeed, finding the best model (ANN or RSM) can help engineers in practical applications predict CO2 adsorption capacity using NF-PAN/PUGMA under different conditions without incurring high-priced chemical materials, electricity, or human resources. The validation results were examined using correlation coefficients (R2) of RSM, RBF, and MLP models. The correlation coefficients for the RSM, RBF, and MLP models were 0.9910, 0.9949, and 0.9968, respectively. Additionally, the average absolute relative deviation (AARD) values for the RBF and MLP models were 0.00046512 and 0.00045511, respectively, indicating that the MLP model is better than the RBF model. To identify the optimal network structure, the trial-and-error method was conducted for MLP and RBF models. The number of neurons was found at 12 and 45 for MLP and RBF, respectively. The optimized effective parameters were obtained using RSM: 25.80% GMA, 66.45% amine, and an irradiation intensity of 28kGy.

Response surface methodology and machine learning based tensile strength prediction in ultrasonic assisted coating of poly lactic acid bone plates manufactured using fused deposition modeling

Optimization of sequential ultrasound-microwave assisted extraction of polyphenols-rich concrete from tuberose flowers through modelling

Machine learning and response surface methods for predicting the compressive strength of high-strength concrete have not been adequately compared. Therefore, this research aimed to predict the compressive strength of high-strength concrete (HSC) using different methods. To achieve this purpose, neuro-fuzzy inference systems (ANFISs), artificial neural networks (ANNs), and response surface methodology (RSM) were used as ensemble methods. Using an ANN and ANFIS, high-strength concrete (HSC) output was modeled and optimized as a function of five independent variables. The RSM was designed with three input variables: cement, and fine and coarse aggregate. To facilitate data entry into Design Expert, the RSM model was divided into six groups, with p-values of responses 1 to 6 of 0.027, 0.010, 0.003, 0.023, 0.002, and 0.026. The following metrics were used to evaluate model compressive strength projection: R, R2, and MSE for ANN and ANFIS modeling; R2, Adj. R2, and Pred. R2 for RSM modeling. Based on the data, it can be concluded that the ANN model (R = 0.999, R2 = 0.998, and MSE = 0.417), RSM model (R = 0.981 and R2 = 0.963), and ANFIS model (R = 0.962, R2 = 0.926, and MSE = 0.655) have a good chance of accurately predicting the compressive strength of high-strength concrete (HSC). Furthermore, there is a strong correlation between the ANN, RSM, and ANFIS models and the experimental data. Nevertheless, the artificial neural network model demonstrates exceptional accuracy. The sensitivity analysis of the ANN model shows that cement and fine aggregate have the most significant effect on predicting compressive strength (45.29% and 35.87%, respectively), while superplasticizer has the least effect (0.227%). RSME values for cement and fine aggregate in the ANFIS model were 0.313 and 0.453 during the test process and 0.733 and 0.563 during the training process. Thus, it was found that both ANN and RSM models presented better results with higher accuracy and can be used for predicting the compressive strength of construction materials.

Machine learning approaches for formation matrix volume prediction from well logs: Insights and lessons learned

Degradation of Bisphenol A by ozonation in a rotating packed bed: Modeling by response surface methodology and artificial neural network

Statistical and machine learning methods for modeling the next-generation PEM water electrolysis systems: response surface methodology and artificial neural networks

This study evaluates the utility of the ensemble framework of feature selection and machine learning (ML) models for regional landslide susceptibility mapping (LSM) in the arid climatic condition of southern Peru. A historical landslide inventory and 24 different landslide influencing factors (LIFs) were prepared using remotely sensed and auxiliary datasets. The LIFs were evaluated using multi-collinearity statistics and their relative importance was measured to select the most discriminative LIFs using the ensemble feature selection method, which was developed using Chi-square, gain ratio, and relief-F methods. We evaluated the performance of ten different ML algorithms (linear discriminant analysis, mixture discriminant analysis, bagged cart, boosted logistic regression, k-nearest neighbors, artificial neural network, support vector machine, random forest, rotation forest, and C5.0) using different accuracy statistics (sensitivity, specificity, area under curve (AUC), and overall accuracy (OA)). We used suitable combinations of individual ML models to develop different ensemble ML models and evaluated their performance in LSM. We assessed the impact of LIFs on ML performance. Among all individual ML models, the k-nearest neighbors (sensitivity = 0.72, specificity = 0.82, AUC = 0.86, OA = 78%) and artificial neural network (sensitivity = 0.71, specificity = 0.85, AUC = 0.87, OA = 79%) algorithms showed the best performance using the top five LIFs, while random forest, rotation forest, and C5.0 (sensitivity = 0.76–0.81, specificity = 0.87, AUC = 0.90–0.93, OA = 82–84%) outperformed other models when developed using all twenty-four LIFs. Among ensemble models, the ensemble of k-nearest neighbors and rotation forest, k-nearest neighbors and artificial neural network, and artificial neural network and rotation forest outperformed other models (sensitivity = 0.72–0.73, specificity = 0.83–0.84, AUC = 0.86, OA = 79%) using the top five LIFs. The landslide susceptibility maps derived using these models indicate that ~2–3% and ~10–12% of the total study area fall within the “very high” and “high” susceptibility. The obtained susceptibility maps can be efficiently used to prioritize landslide mitigation activities.

Optimizing cellulase production from Aspergillus flavus using response surface methodology and machine learning models

Correlation between response surface methodology and artificial neural network in the prediction of bioactive compounds of unripe Musa acuminata peel

Optimization of ultrasound-assisted extraction of bitter compounds and polyphenols from willow gentian underground parts

Computational modelling for predicting rheological properties of composite modified asphalt binders

Measurement of performance and emission distinctiveness of Aegle marmelos seed cake pyrolysis oil/diesel/TBHQ opus powered in a DI diesel engine using ANN and RSM

Modelling and optimization of microhardness of electroless Ni–P–TiO2 composite coating based on machine learning approaches and RSM

K-nearest neighbor based computational intelligence and RSM predictive models for extraction of Cadmium from contaminated soil