Optimization of selective pressurized liquid extraction for extraction and in-cell clean-up of PCDD/Fs in soils and sediments

Abstract

This paper describes the development of methods for selective extraction of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) from soils and sediments, using pressurized liquid extraction with in-cell clean-up (SPLE). Two binary solvent mixtures, viz. dichloromethane/n-heptane (DCM/Hp), and diethylether/n-heptane (DEE/Hp), were evaluated. The SPLE extraction conditions were optimized using central composite face (CCF) design. Three factors were investigated: extraction temperature (60–160°C), number of extraction cycles (1–3) and time per cycle (2–18min). The results showed that DCM/Hp (1/1, v/v) and DEE/Hp (1/2, v/v) were the best extraction solvent compositions and that the extraction temperature was a critical factor that needed careful optimization to achieve high extraction efficiency without co-extraction of sulfuric acid. Under the optimal conditions, the SPLE methods provided results with good accuracy and precision. For the sandy soil certified reference material (CRM-529) the quantification results ended up in the range 82–110% as compared to the concentrations obtained by a reference method based on Soxhlet extraction and external column clean-up. Furthermore, for a clay soil (CRM-530) and a sediment reference material (WMS-01), the accuracy (trueness) of the TEQ values were +11% (DCM/Hp) and +8% (DEE/Hp) for CRM-530, +8% and −7% for WMS-01, respectively. The individual congener concentrations also agreed well with the certified values. These findings show that SPLE is a promising method for combined extraction and clean-up of PCDD/Fs in soil/sediment samples.