Abstract

Power spinning is a very complicated plastic forming process, and its processing quality involves many and complicated process parameters. The simufact.forming software is used to simulate the power spinning of the titanium alloy cylindrical parts. The effects of technological parameters such as attacking angle, roller nose radius, feed rate, spinning temperature, etc. on cylindrical parts accuracy, spinning force, and stress-strain distribution are systematically studied. The causes of spinning process defects are analyzed, and the sensitivity of process parameters that affected spinning quality is ranked. Through orthogonal test analysis, it is determined that a set of optimal process parameters for the titanium alloy cylindrical part spinning process: attacking angle is attacking angle 20°, the roller nose radius is 10mm, feed rate is 1mm/r, spinning temperature is 850°C. The spinning process of titanium alloy cylindrical parts is initially formed, which lays the foundation for the subsequent spinning process tests of titanium alloy cylindrical parts.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.