Abstract
This paper presents optimization of a supercritical carbon dioxide Brayton cycle for three types of 300-MWth small modular reactors (SMRs); a pressurized water reactor (PWR), a sodium-cooled fast reactor (SFR) and a high-temperature gas-cooled reactor (HTGR). The parameters of the pressure ratio and the flow split fraction were examined for sensitivity analysis and optimization of cycle. The optimized cycle efficiencies of PWR, SFR, and HTGR were 30.6%, 46.38%, and 50.04%, respectively. Key components, i.e. turbomachinery and heat exchangers for the SMRs were designed to develop the optimized cycles. The cycle thermal efficiency was improved by using investigating the effects of the channel shape (zigzag, s-shape, airfoil fin) of the printed circuit heat exchangers (PCHEs) on the pressure drop. The study indicated that using airfoil fin type PCHE may increase the cycle thermal efficiency by about 1.0% in comparison with zigzag type PCHE. The effect of turbomachinery efficiencies on the cycle thermal efficiency were investigated.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
