Abstract
The study was carried out to determination the metal Ni(II) in river water samples using cathodic stripping voltammetry (CSV) method. In order to achieve optimum conditions for the determination of metal Ni(II), the accumulation potential and accumulation time conditions of the CSV method have been achieved. The results of this research obtained under the optimum conditions for Ni(II) measurement using an electrolyte solution of ammonium chloride with a potential accumulation (accv) of -0.7 V and a time accumulation (acct) of 60 s. The relative standard deviation of the 10 µg/L Ni(II) standard solution (n=8) is 0.53%, the recovery value is 98.82%. The CSV method for the determination of Ni(II) metal has been successfully applied to river water samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
