Optimisation of Crystal Violet and Methylene Blue Dye Removal from Aqueous Solution onto Water Hyacinth using RSM

Abstract

In this study, the adsorptive removal of two dyes (crystal violet (CV) and methylene blue (MB)) with HNO3 pre-treated water hyacinth powder (WHP) adsorbent was analysed. The experiments were designed using response surface methodology (RSM) with variable input parameter pH (2-12), adsorbent dose (0.5-3 g/L), initial dyes concentration (25-200 mg/L) and time (10-180 min). The optimization condition for dye removal were (pH = 7.22, adsorbent dose = 3.0 g/L, initial dye concentration = 195.28 mg/L and time of contact = 99.29 min) for CV with removal of 98.20% and (pH = 9.82, adsorbent dose = 2.96 g/L, initial dye concentration = 199.36 mg/L and contact time = 111.74 min) for MB with removal of 97.843%. The above findings observed that pre-treated water hyacinth powder can be utilised as a cost-effective and efficient adsorbent for dye effluent wastewater treatment.