Abstract
High-power DC–DC converters are integrated into multi-terminal high-voltage DC (MTDC) networks, typically for voltage matching or flexible DC transmission. This study addresses droop-controlled radial and mesh MTDC networks with transmission loss minimisation considering the impact of integrating a high-power DC–DC converter. DC voltage droop control can achieve minimum power loss in radial MTDC transmission network by controlling the power-sharing among the receiving nodes inversely proportional to their transmission line resistances. Updating the droop characteristics by an optimisation algorithm guarantees optimal power flow (OPF) during renewable source power generation fluctuation. Meanwhile, the mesh network DC voltage references can be updated by the OPF for transmission loss minimisation. This study presents the impact of incorporating a high-power DC–DC converter at different system access lines of a radial MTDC network while targeting efficient power transfer and DC transmission loss minimisation. The effect of introducing a high-power DC–DC converter on the droop characteristic settings during steady-state operation in a radial MTDC network is investigated. Moreover, the impact of a high-power DC–DC converter in mesh MTDC network with OPF operation is explored. To validate the presented concepts, the CIGRE B4 MTDC network is used as a benchmark system with a metaheuristic optimisation technique.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
