Abstract
AbstractA design sensitivity analysis is used to optimize the applied wall temperature vs. time in autoclave curing for thermoset matrix composites. The calculation minimizes the cure time and obeys a maximum temperature constraint in the composite. The transient, coupled thermal and cure problem is solved by a finite element method. Design sensitivity information is extracted efficiently from this primal analysis, based on an analytical, direct differentiation approach. The sensitivities are then used with gradient‐based optimization techniques to systematically improve the curing process. The optimal cure cycles for different numbers of temperature dwells may be similar (for a 2 mm thick part) or very different (for a 4 cm thick part), depending on the nature of the problem. In the latter case a large reduction of cure time is obtained when a three‐dwell cure cycle is used, and the optimizer has more flexibility to adjust the cure cycle. This systematic optimization approach provides a powerful and practical means of optimizing composite manufacturing processes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
