Abstract
Optical transmission properties are described for two types of waveguides formed in AlxGa1−xAs–GaAs–Alx Ga1−xAs epitaxial layers. The first consists of long smooth-walled mesas formed by a masking and etching procedure and the second are obtained using an additional etching step to selectively etch the GaAs layer. The latter structure is potentially useful in forming active devices such as modulators since this structure is self-masking for contacting of the top layer by conventional evaporation techniques. The waveguide dimensions are typically 1–30 μm wide, [sine wave] 1 μm thick, and several mm in length. The transmission measurements are quite similar for both types of guides with attenuation as low as [inverted lazy s]2 cm−1 in wide ([inverted lazy s]20 μm) guides but with losses increasing with decreasing width. The loss appears to arise from imperfections and compositional inhomogeneities in the epitaxial layers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
