On the Use of Scalable NanoISFET Arrays of Silicon with Highly Reproducible Sensor Performance for Biosensor Applications.

Abstract

As a prerequisite to the development of real label-free bioassay applications, a high-throughput top–down nanofabrication process is carried out with a combination of nanoimprint lithography, anisotropic wet-etching, and photolithography methods realizing nanoISFET arrays that are then analyzed for identical sensor characteristics. Here, a newly designed array-based sensor chip exhibits 32 high aspect ratio silicon nanowires (SiNWs) laid out in parallel with 8 unit groups that are connected to a very highly doped, Π-shaped common source and individual drain contacts. Intricately designed contact lines exert equal feed-line resistances and capacitances to homogenize the sensor response as well as to minimize parasitic transport effects and to render easy integration of a fluidic layer on top. The scalable nanofabrication process as outlined in this article casts out a total of 2496 nanowires (NWs) on a 4 inch p-type silicon-on-insulator (SOI) wafer, yielding 78 sensor chips based on nanoISFET arrays. The sensor platform exhibiting high-performance transistor characteristics in buffer solutions is thoroughly characterized using state-of-the-art surface and electrical measurement techniques. Deploying a pH sensor in liquid buffers after high-quality gas-phase silanization, nanoISEFT arrays demonstrate typical pH sensor behavior with sensitivity as high as 43 ± 3 mV·pH–1 and a device-to-device variation of 7% at the wafer scale. Demonstration of a high-density sensor platform with uniform characteristics such as nanoISFET arrays of silicon (Si) in a routine and refined nanofabrication process may serve as an ideal solution deployable for real assay-based applications.