Abstract
This paper presents a new differential method called the mixed method, which was developed to measure the profile accurately under the circumstances of on-machine measurement. In comparison with the 2-point method, this method can more remarkably reduce the datum errors due to scanning, vibration and thermal drift. This method also has the advantage of obtaining the high-frequency component of profiles accurately. An optical sensor was designed and constructed to realize both the 2-point method and the mixed method. With a modulation technique, the sensor has been made to have good thermal drift characteristics. It can measure the displacement and angle of two points on a mirror surface simultaneously with a resolution higher than 0.1μm and 1. Using this sensor ; an on-machine measurement system has been constructed, and measurements of the straightness of cylindrical mirrors have been attempted with the 2-point method and the mixed method. Comparing the results, the favorable characteristics of the mixed method have been confirmed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
