Abstract

Two different dynamic effects influencing the insulated gate bipolar transistor (IGBT) losses in soft-switching converters are demonstrated. The first one, the Dynamic tail-charge effect shows that the tail charge is dependent not only on the absolute value of the current at turn-off, but also on the dynamics of the current. This effect may have a significant impact on the optimization of zero-current-switching converters. The Dynamic conduction losses originate from the conductivity modulation lag of the IGBT. It is shown by experiments that the on-state losses depend on the operating frequency. Different methods to accurately determine the on-state losses are evaluated. It was found that the best method is an indirect measurement, where the stray inductance is identified by the use of an oscillating circuit. The experiments are performed under a sinusoidal current excitation at a fixed amplitude (150 A) for different frequencies (up to 104 kHz). The switching devices used are IGBT modules rated 300-400 A/1200 V in a bridge-leg configuration. From the experiments performed, it is found that IGBTs of a modern punch-though (PT) designs have the lowest losses in the series-loaded resonant converters studied in this paper.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.