Abstract
One of the major challenges faced by laser-based Directed Energy Deposition (DED) is the process efficiency. This efficiency is significantly affected by the percentage of blown powder that effectively reaches the spherical metal melt pool. Increasing the powder efficiency would allow to reduce the overall costs of the DED process and consequently reduce the printed part cost. The present work focuses on the experimental characterization of the powder-gas jet in terms of powder stream shape, stand-off distance and powder-jet focus diameter by using 3 different high speed image-based approaches. The powder jet parameters are linked to the blown powder settings (carrier gas, shielding gas, powder feed rate, particle diameter) and optimized to minimize the powder waste. The different approaches give equivalent results and the reduction of the particle diameter turns out to be the most relevant parameter to decrease the powder-jet focus diameter and therefore increase the powder efficiency.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
