Abstract
Ceramic Catalytic Turbine (CCT) Technology is expected to become an important means to reduce vehicle emissions, especially during engine warm-up. In this paper, catalytic reaction was numerically simulated in 3D for a CCT on a gasoline engine during the warm-up period. The results showed that turbulence in the turbine promotes catalytic activity; CCT starts to significantly affect exhaust pollution since turbine inlet temperature of 550 K; the conversion efficiency of harmful gas in exhaust rises sharply when turbine inlet reaches 575–625 K; when the inlet temperature is about 720 K, the conversion efficiencies of C3H6, CO, and NO reach 23.7%, 21.1%, and 15.5%, respectively. Meanwhile the gas temperature is increased by about 30 K at turbine outlet. In addition, during the process of numerical modeling and calculation, it is found that minor change in boundary layer thickness has a negligible impact on the simulation. However, an extremely thin boundary layer will cause computational divergence. The intensity of catalytic reaction can influence the convergence of numerical calculation, while the moving average of the catalytic reaction with the turbine inlet temperature, in return, can reveal the catalytic light-off process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.