Abstract
This study investigated the effect of beam oscillation on the solidification behaviour during laser welding of Al-5754 to Al-6061 alloy. In this study, a finite element model has been developed to simulate temperature and fluid flow fields by implementing different combinations of volumetric heat source models. Solidification parameters such as temperature gradient (G), solidification rate (R), cooling rate (G × R) and G/R are evaluated to understand the mechanism of microstructure formation. It was found that beam oscillation improves the tensile strength by 21.4% for full penetration welding due to an increase in the percentage of formation of equiaxed grains. Modelling results revealed that the cooling rate increases with an increase in oscillation frequency. However, tensile strength followed a parabolic distribution with a peak at the oscillation frequency of 300 Hz.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
