Numerical modelling of heat treatment of concrete of monolithic structures of buildings in winter conditions of construction

Abstract

The paper presents the results of numerical modeling of heat treatment of concrete of a monolithic floor using a heating wire in winter conditions, depending on factors such as ambient temperature, wind speed, isothermal curing temperature, and others. The following parameters were taken as the main parameters for calculating the heat treatment of concrete: the geometric dimensions of the concreting area, the type and dimensions of the thermal insulation layer to ensure thermal protection of the monolithic structure during the heat treatment of concrete, the type and characteristics of transformers that provide the necessary power for preheating and heating concrete of monolithic floors, as well as the class of concrete, cement consumption and type of heating wire. As a result of calculations, the values of the required power for heating concrete of monolithic structures, the number of transformers, the voltage on the transformer for heating the concrete, as well as the duration of the periods of heating, isothermal curing and cooling during the heat treatment of concrete were obtained. As a result of the performed numerical experiments, the modes of heat treatment of a monolithic floor were deter-mined, which ensure the achievement of the required strength of concrete of monolithic structures. This type of heat treatment of concrete during winter periods has established itself as energy efficient and versatile, since heating wires can be used in structures of any type, configuration and reinforcement. With the correct use of heating wires, it is possible to obtain high-quality reinforced concrete structures erected at negative ambient temperatures.