Abstract
Surface morphology of severely plastically deformed AISI-1018 steel plates, induced by ultrasonic shot peening process, was investigated by using finite element method and experiments. Experiments were conducted and the surface morphology of the peened samples was measured by non-contact 3D profilometry. Effect of the diameter of the shot and processing time on the surface morphology of the samples was investigated and discussed. In addition, a three dimensional FE simulation model was developed to simulate the deformation and plastic strain of the peened surface after single impact. And a numerical algorithm was proposed to predict the surface morphology of the sample after multiple impacts. The proposed algorithm was verified experimentally and the simulation results show a reasonable agreement with the experimental results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.