Numerical investigation of radon dispersion and dose assessment for typical ventilation schemes with an air purifier

Abstract

Radon is a radioactive pollutant that could pose hazards to the surrounding environment and people due to its radioactive decay progenies. In this study, numerical simulations of radon dispersion were conducted under natural and mechanical ventilation with an air-purifier for radon. Factors such as the air supply speed, position and air supply angles of the purifier were considered. Results showed that the increase in the air supply speed from the purifier was an effective solution to reduce indoor radon pollution. The effect was better when the purifier was in the middle of the room. The purification effect was similar when the air supply changed under natural ventilation, while purification function was more effective when the air supply angle was 60° under the mechanical ventilation condition. An effective dose estimation involving typical ventilation schemes with radon purifier was evaluated. Using this approach, the radiation effect on occupants was computed. The calculated effective dose was 0.9 mSv y−1 when the air supply speed of the purifier was 0.2 m s−1 under natural ventilation. As a result, the effective dose calculated was under the annual effective dose limit of 3–10 mSv y−1 recommended by the International Commission on Radiological Protection (ICRP) for public exposure.