Numerical Investigation of Network-Based Shock Wave Propagation of Designated Methane Explosion Source in Subsurface Mine Ventilation System Using 1D FDM Code

Abstract

In coal mining operations, methane explosions constitute a severe safety risk, endangering miners’ lives and causing substantial economic losses, which, in turn, weaken the production efficiency and economic benefits of the mining industry and hinder the sustainable development of the industry. To address this challenge, this article explores the application of decoupling network-based methods in methane explosion simulation, aiming to optimize underground mine ventilation system design through scientific means and enhance safety protection for miners. We used the one-dimensional finite difference method (FDM) software Flowmaster to simulate the propagation process of shock waves from a gas explosion source in complex underground tunnel networks, covering a wide range of scenarios from laboratory-scale parallel network samples to full-scale experimental mine settings. During the simulation, we traced the pressure loss in the propagation of the shock wave in detail, taking into account the effects of pipeline friction, shock losses caused by bends and obstacles, T-joint branching connections, and cross-sectional changes. The results of these two case studies were presented, leading to the following insights: (1) geometric variations within airway networks exert a relatively minor influence on overpressure; (2) the positioning of the vent positively contributes to attenuation effects; (3) rarefaction waves propagate over greater distances than compression waves; and (4) oscillatory phenomena were detected in the conduits connecting to the surface. This research introduces a computationally efficient method for predicting methane explosions in complex underground ventilation networks, offering reasonable engineering accuracy. These research results provide valuable references for the safe design of underground mine ventilation systems, which can help to create a safer and more efficient mining environment and effectively protect the lives of miners.