Abstract
The aim of this study was to investigate the cyclic creep–fatigue interaction behavior in a steam turbine inlet valve under cyclic thermomechanical loading conditions. Three years and nine iterations of idealized startup–steady-state operation–shutdown process were chosen. The Ramberg–Osgood model, the Norton–Bailey law, and continuum damage mechanics were applied to describe the stress–strain behavior and calculate the damage. The strength of the steam valve revealed that significant stress variation mainly occurred at the joint parts between the valve diffuser and the adjust valve body, due to the combination of the enhanced turbulent flow and assembly force at these areas. The contact stress at the region of component assembly was sensitive to the cyclic loading at the initial iterations. The maximum decrease amplitude in the normalized contact stress between the second and the fourth iterations reached 0.12. The damage analysis disclosed that the notch of the deflector in the adjust valve had the maximum damage due to the stress concentration.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
