Abstract
Correct evaluation of rudder performance is a key issue in assessing ship maneuverability. This paper presents a simplified approach based on a viscous flow solver to address propeller and rudder interactions. Viscous flow solvers have been applied to this type of problems, but the large computational requests limit (or even prevent) their application at a preliminary ship design stage. Based on this idea, a simplified approach to include the propeller effect in front of the rudder is considered to speed up the solution. Based on the concept of body forces, this approach enables sufficiently fast computation for a preliminary ship design stage, thereby maintaining its reliability. To define the limitations of the proposed procedure, an extensive analysis of the simplified method is performed and the results are compared with experimental data presented in the literature. Initially, the reported results show the capability of the body-force approach to represent the inflow field to the rudder without the full description of the propeller, also with regard to the complex bollard pull condition. Consequently, the rudder forces are satisfactorily predicted at least with regard to the lift force. However, the drag force evaluation is more problematic and causes higher discrepancies. Nevertheless, these discrepancies may be accepted due to their lower influence on the overall ship maneuverability performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.