Abstract
Plasma electrolytic oxidation method (PEO) is used to create high hardness coating with the abrasion resistance and corrosion resistance on alloys of aluminum, magnesium, copper, titanium, etc. Creat a coating on the D16 alloy surface by the PEO method in the electrolytic solution of silicate- alkaline Na2O.(SiO2)n modul: 2,85 (12 g/L) and NaOH (2 g/L); add Co(OH)2 and V2O5 to silicate - alkaline solution with a ratio of 2 g/l, we obtain a coating with a hardness increased from 7.3 to 7.9 times, protection efficiency against corrosion in 5 % NaCl solution, it reaches 89.64 to 94.03 %. Through analysis of coating by SEM, EDS and X-Rays methods, it was found that in the coating composition are present of metal oxides, which come from D16 alloy and substances in the electrolyte solutions. The coating has a high hardness due to the formation of aluminum oxide in the form of α-Al2O3.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
