New Building Blocks for Modular Design of Elliptic and Self-Equalized Filters

Abstract

This paper introduces building blocks for modular design of elliptic, pseudoelliptic, and self-equalized filters. The first building block is of second order and generates two transmission zeros (TZs), which are either on the real or imaginary axis. Moving the zeros from the real axis (linear phase response) to the imaginary axis (attenuation poles) requires changing the sign of one coupling coefficient. The second building block is a structure of order three, called extended doublet, which allows the generation of two TZs practically anywhere in the complex plane. An important property of this block is its ability to move the two TZs from the real axis to the imaginary axis of the complex s-plane without changing the signs of its coupling coefficients. The third building block is of third order and generates two TZs, which can be moved from the real to the imaginary axis by changing the sign of one coupling coefficient. Simple waveguide structures to implement these blocks are introduced for validation, although this general approach is feasible for all resonator filter types. Higher order filters are designed modularly by cascading an arbitrary number of these building blocks. A novel concept, which allows the independent control of each pair of TZs in higher order filters, is then introduced. It is shown that the new concept allows a filter of order N to generate N TZs without directly coupling the source to the load even when the coupling coefficients are all assumed frequency independent. The same approach can be used to design and reduce the sensitivity of higher order elliptic and pseudoelliptic filters using other building blocks such as doublets or a mixture of building blocks of different orders and properties. Measured results and extensive computer simulation are presented to demonstrate the validity of the concept and the performance of the designed filters.