Abstract
Superhydrophobic surfaces represent a promising strategy to consistently promote dropwise condensation, which can lead to an important increase of the heat transfer coefficient as compared to filmwise condensation. To get superhydrophobicity, it is necessary to reduce the surface energy and to modify the surface structure by achieving superficial micro-roughness.In this work, aluminum surfaces were modified via chemical methods to promote dropwise condensation due to superhydrophobic behavior. The metal substrates were etched using three different strategies to impart nanoscale roughness; a fluorosilane film was subsequently deposited over them to decrease the surface energy in two different modes (spin coating and immersion). In the end, four different surfaces were investigated. Experimental tests of pure steam condensation on the resulting substrates showed that dropwise condensation was successfully achieved on the superhydrophobic surfaces, measuring heat transfer coefficients as high as 100 kW m−2 K−1. Although the dropwise condensation moves soon to hybrid and filmwise condensation, the performance during pure dropwise condensation appears to be clearly linked to the different chemical procedures used in the sample preparation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.