Abstract
This study proposed the TRP, a remote phosphor structure that has 3 phosphor layers, to ehance the chromatic quality and lumen output for white light-emitting diodes devices (WLEDs). The arrangment of phosphor layers is yellow YAG:Ce3+ phosphor, green Na3Ce(PO4)2:Tb3+ phosphor, and red Na(Mg2–xMnX)LiSi4O10F2:Mn phosphor from bottom to top. Red Na(Mg2–xMnX)LiSi4O10F2:Mn phosphor is used for the red light component to boost color rendering index (CRI). The green layer Na3Ce(PO4)2:Tb3+ phosphor is utilized for the green light component to produce higher luminous flux (LF). With the addition of red and green phosphor, the yellow YAG:Ce3+ concentration must decrease to maintain the 6000 K color temperature. The research results show that red phosphor Na(Mg2–xMnX)LiSi4O10F2:Mn concentration is beneficial for CRI, while green phosphor Na3Ce(PO4)2:Tb3+ is detrimental to CRI. Morever, CQS reaction with red and green phosphor is also studied, which show notable improvement when Na(Mg2–xMnX)LiSi4O10F2:Mn concentration is from 10%-14%, regardless of Na3Ce(PO4)2:Tb3+. The luminous flux (LF) can also increase for more than 40% with the reduced light loss and added green phosphor. Research results are valuable references for producers to enhance the color quality and the light emission of WLEDs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: TELKOMNIKA (Telecommunication Computing Electronics and Control)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
