Multitude Active Noise cancellation using White Shark Optimized Deep Learning Network

Unwanted signals in information-bearing signal referred to as noise could degrade the strength of signals in terms of intelligibility and quality. Over the decade, various researchers developed algorithms to enhance speech signal quality and noise reduction. To address the issue, the study propounded the active noise cancellation method by using a hybridized convolutional neural network–long short-term memory (CNN-LSTM) approach and genetic algorithm (GA)-based community detection feature extraction enhanced with least mean square (LMS) noise filtering process. The quality filtered signals were extracted with feature correlation data and precise relevant features using genetic algorithm-based community detection. The selective parameters aid the classification performance, facilitated by hyperparameter fine-tuning of GA-based community detection. The results of incorporating LSTM will eliminate unnecessary memory content by correlating past information outcomes to classify new feature values. In this method, abnormal and normal signals are classified by our LSTM layers output. These classified outcomes aid in the denoise of active voice signals with a fast convergence rate. The efficiency of the proposed method was assessed in terms of its performance through comparative active noise cancellation (ANC) methods. The higher accuracy rate and low NMSE in the classification of audio signals evidenced the efficacy of the proposed ANC model.

Timely and accurate crop yield information can ensure regional food security. In the field of predicting crop yields, deep learning techniques such as long short-term memory (LSTM) and convolutional neural networks (CNN) are frequently employed. Many studies have shown that the predictions of models combining the two are better than those of single models. Crop growth can be reflected by the vegetation index calculated using data from remote sensing. However, the use of pure remote sensing data alone ignores the spatial heterogeneity of different regions. In this paper, we tested a total of three models, CNN-LSTM, CNN and convolutional LSTM (ConvLSTM), for predicting the annual rice yield at the county level in Hubei Province, China. The model was trained by ERA5 temperature (AT) data, MODIS remote sensing data including the Enhanced Vegetation Index (EVI), Gross Primary Productivity (GPP) and Soil-Adapted Vegetation Index (SAVI), and a dummy variable representing spatial heterogeneity; rice yield data from 2000–2019 were employed as labels. Data download and processing were based on Google Earth Engine (GEE). The downloaded remote sensing images were processed into normalized histograms for the training and prediction of deep learning models. According to the experimental findings, the model that included a dummy variable to represent spatial heterogeneity had a stronger predictive ability than the model trained using just remote sensing data. The prediction performance of the CNN-LSTM model outperformed the CNN or ConvLSTM model.

Air quality index forecast in Beijing based on CNN-LSTM multi-model

The use of electronic loads has improved many aspects of everyday life, permitting more efficient, precise and automated process. As a drawback, the nonlinear behavior of these systems entails the injection of electrical disturbances on the power grid that can cause distortion of voltage and current. In order to adopt countermeasures, it is important to detect and classify these disturbances. To do this, several Machine Learning Algorithms are currently exploited. Among them, for the present work, the Long Short Term Memory (LSTM), the Convolutional Neural Networks (CNN), the Convolutional Neural Networks Long Short Term Memory (CNN-LSTM) and the CNN-LSTM with adjusted hyperparameters are compared. As a preliminary stage of the research, the voltage and current time signals are simulated using MATLAB Simulink. Thanks to the simulation results, it is possible to acquire a current and voltage dataset with which the identification algorithms are trained, validated and tested. These datasets include simulations of several disturbances such as Sag, Swell, Harmonics, Transient, Notch and Interruption. Data Augmentation techniques are used in order to increase the variability of the training and validation dataset in order to obtain a generalized result. After that, the networks are fed with an experimental dataset of voltage and current field measurements containing the disturbances mentioned above. The networks have been compared, resulting in a 79.14% correct classification rate with the LSTM network versus a 84.58% for the CNN, 84.76% for the CNN-LSTM and a 83.66% for the CNN-LSTM with adjusted hyperparameters. All of these networks are tested using real measurements.

A hybrid deep learning model for discrimination of physical disturbance and cyber-attack detection in smart grid

Fine particulate matter (PM2.5) is a major air pollutant affecting human survival, development and health. By predicting the spatial distribution concentration of PM2.5, pollutant sources can be better traced, allowing measures to protect human health to be implemented. Thus, the purpose of this study is to predict and analyze the PM2.5 concentration of stations based on the integrated deep learning of a convolutional neural network long short-term memory (CNN-LSTM) model. To solve the complexity and nonlinear characteristics of PM2.5 time series data problems, we adopted the CNN-LSTM deep learning model. We collected the PM2.5data of Qingdao in 2020 as well as meteorological factors such as temperature, wind speed and air pressure for pre-processing and characteristic analysis. Then, the CNN-LSTM deep learning model was integrated to capture the temporal and spatial features and trends in the data. The CNN layer was used to extract spatial features, while the LSTM layer was used to learn time dependencies. Through comparative experiments and model evaluation, we found that the CNN-LSTM model can achieve excellent PM2.5 prediction performance. The results show that the coefficient of determination (R2) is 0.91, and the root mean square error (RMSE) is 8.216µg/m3. The CNN-LSTM model achieves better prediction accuracy and generalizability compared with those of the CNN and LSTM models (R2 values of 0.85 and 0.83, respectively, and RMSE values of 11.356 and 14.367, respectively). Finally, we analyzed and explained the predicted results. We also found that some meteorological factors (such as air temperature, pressure, and wind speed) have significant effects on the PM2.5 concentration at ground stations in Qingdao. In summary, by using deep learning methods, we obtained better prediction performance and revealed the association between PM2.5 concentration and meteorological factors. These findings are of great significance for improving the quality of the atmospheric environment and protecting public health.

This paper presents deep learning models—specifically, Long Short-Term Memory (LSTM) networks and hybrid Convolutional Neural Network–LSTM (CNN-LSTM) with a Copula-Based Random Forest (CBRF) model to estimate Heterogeneous Treatment Effects (HTEs) in survival analysis. The proposed method is designed to capture non-linear relationships and temporal dependencies in clinical and genomic data, with a particular focus on exploring how treatment effects vary by race as a moderating factor. Using breast cancer data from the TCGA-BRCA dataset, which includes both clinical variables and gene expression profiles, we filter the data to focus on two racial groups: Black or African American and White. Dimensionality reduction is performed using Principal Component Analysis (PCA). We compare the CNN-LSTM, LSTM, and CBRF models under three weighting strategies—no weights, Horvitz–Thompson (HT) weights, and Inverse Probability of Treatment Weighting (IPTW)—for predicting treatment effects. Model performance is evaluated using Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), Concordance statistic (C-statistic), Average Treatment Effect (ATE), and Conditional Average Treatment Effect (CATE) by race. The CNN-LSTM model consistently outperforms the others, achieving the lowest prediction errors and highest discrimination, particularly under IPTW. Among the weighting strategies, IPTW yields the most substantial improvements in model performance and bias reduction. Importantly, race-specific treatment effects exhibit notable variation: CNN-LSTM estimates a slightly higher CATE for Black individuals under IPTW. Overall, CNN-LSTM with IPTW is recommended for robust and equitable causal inference, especially in racially stratified settings.

Smart mirrors are conventional mirrors that are augmented with embedded system capabilities to provide comfort and sophistication for users, including introducing the speech command function. However, existing research still applies the Google Speech API, which utilizes the cloud and provides sub-optimal processing time. Our research aim is to design speech recognition using Mel-frequency cepstral coefficients (MFCC) and convolutional neural network–long short-term memory (CNN-LSTM) to be applied to smart mirror edge devices for optimum processing time. Our first step was to download a synthetic speech recognition dataset consisting of waveform audio files (WAVs) from Kaggle, which included the utterances “left,” “right,” “yes,” “no,” “on,” and “off. ” We then designed speech recognition by involving Fourier transformation and low-pass filtering. We benchmark MFCC with linear predictive coding (LPC) because both are feature extraction methods on speech datasets. Then, we benchmarked CNN-LSTM with LSTM, simple recurrent neural network (RNN), and gated recurrent unit (GRU). Finally, we designed a smart mirror system complete with GUI and functions. The test results show that CNN-LSTM performs better than the three other methods with accuracy, precision, recall, and an f1-score of 0.92. The speech command with the best precision is "no," with a value of 0.940. Meanwhile, the command with the best recall is "off," with a value of 0.963. On the other hand, the speech command with the worst precision and recall is "other," with a value of 0.839. The contribution of this research is a smart mirror whose speech commands are carried out on the edge device with CNN-LSTM.

This paper takes a low-speed axial contra-rotating compressor as the experimental object, and the sensor array is used to collect the pressure sequences in stall conditions for different speed configurations. These pressure data sets are then preprocessed to train the neural networks. A self-learning stall threshold method based on kernel density estimation (KDE) is utilized to obtain the alarm thresholds. By utilizing the best-performing long short-term memory (LSTM) model to predict the stall initiation time for 15 speed configurations with different stall characteristics, the results show that the model can provide early warning before stall for 11 speed configurations. For the rest four speed configurations, the stall initiation time predicted by LSTM is unsatisfactory. To overcome the poor generalizability of LSTM, a convolutional neural network (CNN) combined with LSTM (CNN–LSTM) stall warning method is developed. The stall warning results indicate that the CNN–LSTM has a better capability in fitting the nonlinear pressure stall data and issues warnings before a stall occurs for all speed configurations. By comparing the pressure time series predicted by LSTM and CNN–LSTM, it is obvious that the CNN–LSTM is more sensitive to perturbations than before stall occurs.

Individuals who are suffering from the most severe of motor disabilities can improve their quality of life by controlling and directing mechanical and electronic devices. As for Spinal Cord Injured (SCI) patients', attempted hand movements can be classified using electroencephalography (EEG). The research aims to develop a hybrid CNN‐LSTM (Convolutional Neural Network—Long Short Term Memory) architecture for multichannel EEG signal classification. It is a challenging task to classify real‐world multichannel EEG data from SCI patients. The proposed research preprocessed the EEG data to improve the signal‐to‐noise ratio and arranged for them to extract additional information from the data. The preprocessing step includes filtering, downsampling, and artifact removal, while the postprocessing step includes time‐frequency representation and spatial information encoding. A hybrid CNN‐LSTM is used for feature extraction and classification. The proposed method has been implemented on a dataset consisting of 5 different classes of attempted hand movements from 10 SCI patients. The average classification accuracy of 92.36% is achieved for 5‐class classification. To check the global validity of the proposed network, the BCI competition IV data is classified by the proposed method and has found 92.70% overall accuracy.

CNN-LSTM architecture for predictive indoor temperature modeling

Classification and regression-based convolutional neural network and long short-term memory configuration for bridge damage identification using long-term monitoring vibration data

The development of electric power systems has become more complex. Consequently, electric power systems are operating closer to their limits and are more susceptible to instability when a disturbance occurs. Transient stability problems are especially prevalent. In addition, the identification of transient stability is difficult to achieve in real time using the current measurement data. This research focuses on developing a convolutional neural network—long short-term memory (CNN-LSTM) model using historical data events to detect transient stability considering time-series measurement data. The model was developed by considering noise, delay, and loss in measurement data, line outage and variable renewable energy (VRE) integration scenarios. The model requires PMU measurements to provide high sampling rate time-series information. In addition, the effects of different numbers of PMUs were also simulated. The CNN-LSTM method was trained using a synthetic dataset produced using the DigSILENT PowerFactory simulation to represent the PMU measurement data. The IEEE 39 bus test system was used to simulate the model under different loading conditions. On the basis of the research results, the proposed CNN-LSTM model is able to detect stable and unstable conditions of transient stability only from the magnitude and angle of the bus voltage, without considering system parameter information on the network. The accuracy of transient stability detection reached above 99% in all scenarios. The CNN-LSTM method also required less computation time compared to CNN and conventional LSTM with the average computation times of 190.4, 4001.8 and 229.8 s, respectively.

Water quality prediction is of great significance in pollution control, prevention, and management. Deep learning models have been applied to water quality prediction in many recent studies. However, most existing deep learning models for water quality prediction are used for single-site data, only considering the time dependency of water quality data and ignoring the spatial correlation among multi-sites. This research defines and analyzes the non-aligned spatial correlations that exist in multi-site water quality data. Then deploy spatial-temporal graph convolution to process water quality data, which takes into account both the temporal and spatial correlation of multi-site water quality data. A multi-site water pollution prediction method called W-WaveNet is proposed that integrates adaptive graph convolution and Convolutional Neural Network, Long Short-Term Memory (CNN-LSTM). It integrates temporal and spatial models by interleaved stacking. Theoretical analysis shows that the method can deal with non-aligned spatial correlations in different time spans, which is suitable for water quality data processing. The model validates water quality data generated on two real river sections that have multiple sites. The experimental results were compared with the results of Support Vector Regression, CNN-LSTM, and Spatial-Temporal Graph Convolutional Networks (STGCN). It shows that when W-WaveNet predicts water quality over two river sections, the average Mean Absolute Error is 0.264, which is 45.2% lower than the commonly used CNN-LSTM model and 23.8% lower than the STGCN. The comparison experiments also demonstrate that W-WaveNet has a more stable performance in predicting longer sequences.

Research on structural health monitoring database construction and intelligent diagnosis method based on a CNN–LSTM integrated model