Abstract
The aim of this article is to introduce multi downstream passive optical network based on optical code division multiple access (OCDMA) technique, which is considered as a next-generation optical access network. Hence, incorporating this technique with passive optical network (PON) will enable the system to support higher bandwidth compared to the standard PON. The decoder is configured based on spectral coding because of its good noise suppression properties. Since the most important aspect of PON architecture is its simplicity, a multi PON access network each PON comprises 9 users encoded by modified quadratic congruence (MQC) codes at the C band for downstream signals with channel spacing 25/50 GHz is simulated. In this article low error rate transmission at high data rate for distances up to 28 km is demonstrated. Variation in the results was studied when varied fiber length, data rate and different effective power were applied. It has been shown that OCDMA is capable of providing gigabit-per-second for each user. The receiver sensitivity is affected by the multi premises system, where the best system performance can only be achieved when the effective power is -1dBm. Nevertheless, the results have indicated that the proposed PON based on spectral amplitude coding OCDMA technique is capable to support multi premises network.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.