Abstract
Abstract The fatigue life model was optimized in terms of the multi axial high cycle fatigue failures of drilling tools. Based on the multi axial fatigue theory, the stress state under the non-proportional loading and the cracking behaviour of the material under multi axial fatigue were analyzed, the multi axial fatigue models were summarized, and the Dang Van model was recommended for judging whether or not the drilling tool will be subjected to fatigue failure under the certain stress state. The fundamental criterion, derivation principle, application scope and fatigue limit calculation method were introduced. The Dang Van model was validated with field failures of the drive shaft of stabilizer steering stator which was used in the drilling process of oil and gas fields, and compared with the conventional mean stress model. The results show that the mean stress model predicts in a over conservative way, and the Dang Van model is more applicable for predicting multi axial high cycle fatigue life of drilling tools.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
