Abstract

The VERDON-3 and -4 tests were part of the VERDON-ISTP programme that aimed at studying the fuel and fission products (FP) behaviour in severe accident conditions. The main objective of these two complementary tests was the study of MOX fuel behaviour and FP release under oxidising (VERDON-3) and reducing (VERDON-4) conditions at very high temperature (>2300 °C). Complementary to the on-line gamma spectrometry measurements performed during the two tests, post-test characterisations were carried out in order to tackle these tasks. The two samples recovered after the VERDON-3 and -4 tests were compared to a third one extracted from the same father rod and left as irradiated. This comparison enabled to highlight the effect of temperature and atmosphere on the fuel behaviour. These three samples were characterised by several techniques available at the LECA-STAR facility of the CEA Cadarache. Experimental observations showed that an interaction between the fuel and the cladding occurred in both types of conditions by interdiffusion mainly between U and Zr. This phenomenon led to the formation of a UyZr1-yO2±x cubic phase at the periphery of the fuel pellet which melted in the VERDON-4 test conditions, penetrating through the cracks of the sample and dissolving the fuel matrix. No liquid was formed during the VERDON-3 test despite the formation of a large fuel-cladding interaction zone.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.