Abstract
PurposeCurrently, there are high dose rate afterloaders available that can drive two different radioactive sources simultaneously. The source-source and source-cable attenuations are not taken into account by current planning systems. The purpose of this work is to characterize these effects and their overall impact on clinically relevant metrics. Methods and MaterialsA 192Ir (169Yb) Flexitron source is modeled within a Monte Carlo code, and its water dose distribution is evaluated. A second source (cable) is placed parallel at various distances to quantify the dose perturbations. The dual-source setup is then transposed to clinical prostate plans (n = 11). Each plan D90 is compared to the single-source D90. The worst-case scenario (two sources traveling in closely located positions) establishes the upper bounds of the deviations. Two setups are considered with sources constrained in catheter pairs or freely distributed. A metric proportional to the dwell times and R−2 (where R is the intersource separation) helps determine the source position in each configuration. ResultsThe dose profiles vs. R−2 (3–20 mm) show a maximal dose reduction effect of 65% (25%) for 169Yb (192Ir) at small distances. A shadow region with at least 10% dose difference extends up to 10 cm. A similar study with a steel drive cable shows similar behavior with a maximal decrease of 10% (3%) under irradiation of a 169Yb (192Ir) source. The relative D90 difference with the single source setup is 2.3% on average, up to 3.7%. It is obtained by superimposing the contributions from catheter pairs in the dual-source loading. ConclusionOverall deviations observed in D90 compared to a single source setup are not significant for all cases studied.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
